Double Magnetic Switch 20A
2 switches in one.
Designed for RC jet planes and other double battery models. It’s designed with 2 switches which are activated from one single point. Instead of turning on the ECU in one place and receiver in another. All is located in one place with the Double Magnetic Switch. The batteries are separate so it is possible to use 3s on one switch and 2s on the other switch. It can be used as mentioned before for receiver and ECU. But also as a switch for a dual battery power unit, receiver and scale light or receiver and smoke unit etc.
A clean and easy way to turn on your model, just slide the magnet across the marked area. The switch is mounted inside of the fuselage, out of the air stream, and the magnet will easily activate the switch from outside. No more fumbling for little switches, or plugging in connectors.
This produckt has a built-in failsafe function. It remembers its state for at least 10 sec, if disconnect from the battery. It will protects the switch against power glitch caused by bad battery connection etc.
The switch has an ultra low stand-by consumption in off-state. The consumption is so low that the switch can be connected to a small battery for several years without discharging it.
Input voltage range: 4v~13v
Ultra low dropout voltage: 39mV @ 20A
Output current constant: 20A @ +25C ambient temperature
Output current burst: >40A
Ultra low stand-by current: 5µA (micro-ampere)
Dimensions: 46 x 48 x 8 mm / 1.81 x 1.88 x 0.31 in
Weight: 12.7 grams / 0.44 oz
Operational temperature range: -40C to +85C
All switches have been tested with 30A for 30 sec before delivery. Standby consumption is controlled and a visual inspection is made.
Magnet and Stickers