Magnetic Switch 25A 5-20V
Very small and incredible strong.
Drive train switch for small models. But there are many other things it can be used for such as rc submarine, diving lights, immobilizer for motorcycles and cars. etc.
A clean and easy way to turn on your model, just slide the magnet across the marked area. The switch is mounted inside of the fuselage, out of the air stream, and the magnet will easily activate the switch from outside. No more fumbling for little switches, or plugging in connectors.
This produckt has a built-in failsafe function. It remembers its state for at least 10 sec, if disconnect from the battery. It will protects the switch against power glitch caused by bad battery connection etc.
The switch has an ultra low stand-by consumption in off-state. The consumption is so low that the switch can be connected to a small battery for several years without discharging it.
Input voltage range: 5v~20v
Ultra low dropout voltage: 51mV@30A
Output current constant: 25A @ +25C ambient temperature
Output current burst: >50A
Ultra low stand-by current: 5µA (micro-ampere)
Wire: high-quality 2.5mm2 / AWG 14
Weight including cables: 16 grams / 0.56oz.
Length including cables: 24 cm / 9.4 in
Dimensions: 17 x 7 x 3 mm / 0.67 x 0.27 x 0.12 in
Operational temperature range: -40C to +85C
All switches have been tested with 20A for 30 sec before delivery. Standby consumption is controlled and a visual inspection is made.
Magnet and Stickers
Magnetic Switch Manual